Index




	Index

A

Assign a Drive Letter

B

C

Configure the RAIDZONE Disk Array

Create a Mirror Partition

Create a Partition

Create a RAID 5 Partition

Create a Span Partition

Create a Standard Partition

Create a Stripe Partition

Creating a Windows NT Emergency Repair Diskette

Creating Partition Level Logical Sets

D

Delete a Partition

Diagnostic Menu

Disk Array Overview

Disk Arrays Require Tape Backup

Disk Level Hot Spare

Disk Level Logical Sets

E

Enable Auto Hot Sparing

Exchange Disk with Hot Spare

F

Flash Disk Lights

Format a Partition

Formatting a Partition

H

Hot Swap a Disk

I

Install ATA or UltraATA Disks Into the SmartCan Disk Enclosure

Install the RAIDZONE Administration Software and Partition Your Disks

Install the RAIDZONE Hardware

Install the RAIDZONE Hardware in Your Computer

Install the RAIDZONE PCI Controller Card

Install the RAIDZONE Windows NT Software From Diskette

Install the SmartCan Disk Enclosure and Connect it to the RAIDZONE PCI Card

Install Windows NT First If Using a Non-RAIDZONE Boot Disk

M

Monitoring Disk Array Status

N

New Disk Level Mirror

O

P

Partition Level Logical Sets

R

RAID 10 (Striped Mirrors)

RAID Disk Array Overview Introduction

RAID Systems Need Tape Backups

RAID0 (Striping)

RAID1 (Mirroring)

RAID2 (Bit Striping with ECC)

RAID3 (Bit Striping with Parity)

RAID4 (Striping with Fixed Parity)

RAID5 (Striping with Striped Parity)

RAIDZONE Administration

RAIDZONE Configuration

RAIDZONE Hardware Overview

RAIDZONE Software Guide

RAIDZONE Software Reference

Rebuild Fault Tolerant Set

Refresh Status Info

Repairing an Orphaned or Unhealthy Disk

Restore Configuration

S

Save Configuration Command

Show Event Viewer

T

Test the Complete Disk Array Subsystem

W

Which RAID Types Should I Use?

[Sales Contacts]

[VARS & Dealers]

[Corporate Information]


		Please contact our Webmaster with questions or comments.

	Sales Enquiries Phone: 1-800-388-1896 or 1-905-940-2900

			Copyright 1997 Consensys Corp. All rights reserved.